Tag: computer wire

Day 2 With New Bike Seat

On By Michel McDonaldIn BikeLeave a comment

Yesterday I felt everything was against me.  My back tire had a bump in it, my computer wire was cut from the pimple in the front tire and my seat just wasn’t comfortable at all.

But yesterday I fixed the back tire by putting in a different tube, not the presta but the other valve, I fixed the wires for the computer and I adjusted my seat ok.

Today I woke up late.  I normally set the alarm to wake me up at 4am but I guess I forgot last night because I woke up at 5:30am.  So I was able to leave at 6am.  I thought the world was going to be against me again but it was ok.

I thought that yesterdays last adjustment of the seat was good where I made it so it’s forward and not backward but that wasn’t good at all.  I just felt like I was going to fall off.  When I got to the bike trail I decided I need to adjust it yet again so I just moved it back 1 notch and it was good the rest of the trip.

I did my 20 miles and all was good.  Although, I need to sit in the Shiatsu massager for awhile because my back is killing me from that lol.  It’s like my arms are pushing too hard on the handlebars or something.  I’m sure that I will be comfortable with this new seat and then there won’t be any problem.

Oh one last thing, when I was looking at the website where I bought the new seat from I was debating on if I should buy the cheapest seat by itself or maybe with the sheepskin.  Or maybe I should buy the gel seat I just don’t know.  So I emailed the website asking them for their opinion and the guy who runs it said that he uses the classic with sheepskin so I took his word for it and bought that.  Big mistake.

I should’ve taken into consideration that sheepskin is going to be hot during the summer lol.  DUH!  And I really do need that gel seat.  It’s just too bad that I gave my old seat along with the gel cover to a neighbor.  I could’ve cut the gel part and sewn it to the bottom of the sheepskin.  Or I could just cut it at the crotch area and just make my own cover with the fabric that it has on it.  Just a little nip and tuck here and I could’ve used it.  Oh well, maybe next check I can buy another gel seat cover from Wal-Mart or Target and just cut it up and put it on there.

My Interesting Ride Today

On By Michel McDonaldIn Bike, Cycling, ExerciseLeave a comment

I went on my ride this morning but I found that I had a few problems.

  • As I was riding the bike I got to where Kaiser Permanente hospital is and their lights were shining on me and I went to look at the computer to see what time it was and to see how fast I was going with my new tires and seat but the screen was blank.  So I pulled over to find out what the issue was.  When I put the wheel back on the front fork I put it on backwards so my magnet was on the wrong side of the wheel lol.  So I put it on the correct side and spun the wheel but it still didn’t work.  It’s because of what my pimpled front tire did to the computer wire, it stripped it so there are wires that are exposed so it doesn’t work now.  So today I have no reference of how fast I was going or how many calories I burned.
  • When I left the house I didn’t notice that my back wheel had a bump to it.  As I was riding on the bike trail I could feel the bump and I wasn’t sure what I was supposed to do about it because it’s a brand spanking new tire.  When Darrin bought me the new tires he also bought me new tubes that had the presta valves.  My front wheel is brand new (26×2.00) but my back wheel (26×1.95) is the original wheel on the bike so since they are both different sizes they both won’t accept presta valve because the presta valve tubes have this big ring under the valve.  The regular tubes that you buy don’t so I just had to change the tube on the bike trail then all was good.
  • And now my new seat lol.  Yesterday when I first put the new seat on I rode it down the street then had to come back to adjust it.  Then I rode around a bit and had to make an adjustment here and there and I thought I had it all worked out but I guess I didn’t.  So on my bike ride this morning I think I pulled over 3 times to make adjustments.  I finally got it to a comfortable position.  I had to raise my handlebars though because even though the instructions are to lower the seat by 1 inch I did that yesterday and my legs were bending too much so I put it back so today all I had to do was raise the handlebars and that fixed that issue.

Since my computer didn’t work today I’m going to have to write down an old time when I used to go 16 miles so I can at least have something to write down.  I’ll have to fix that wire today so that I can use it tomorrow.

“The Bicycle Seat” website that I got the new seat from say to give it at least 3 weeks and considering I’ve already given my old seat and the gel cover to a neighbor I have no choice but to give it 3 weeks lol.  I can’t ride any other way.  But I do want to give it some time to get used to because I’m not numb today in the naughty parts but my butt is killing me lol.  My arms are killing me too ugh.