Bored

On By Michel McDonaldIn Daily BlogLeave a comment

I get bored easily, real easily.  When I find an interest in something it’s all I can think of, talk of, even dream of.  But as with everything I get bored with it after awhile.

The boredom graveyard:

Facebook, YouTube, MySpace, EverQuest, crafts, Snood, Just video games in general, the internet… my computer….  my bike?  Maybe soon.

I don’t know, I still visit those websites I’m bored with hoping to find something that will spark an interest again, except for EverQuest because that’s not free to explore.  They charge you $15 a month so it’s not good to be bored with something that you have to pay to play.

I guess I’m just bored with everything, life included.  I’m bored with people who think they are funny.  Wait a minute… I think I’m funny.  Am I bored with myself?  Good lord, I’m bored with myself!  UGH!  I need to make myself laugh and if I can’t do that then I have no hope for humanity.

Yummy Pigeons

On By Michel McDonaldIn RecipesLeave a comment

I found this a couple of years ago in the kitchen with a lot of other recipes and I just couldn’t resist scanning it lol.  I’m not sure if Opal ever made this but just reading the recipe will make anyone cringe and laugh at the same time.  I don’t know how old this is but I’m certainly glad I didn’t live during the time that it was acceptable to eat pigeons on toast with gravy.

Back Problems

On By Michel McDonaldIn HealthLeave a comment

I don’t know what’s going on with me lately but it seems that since I got that new bicycle seat I’ve had nothing but back problems.  It could be that I still don’t have it adjusted right, I don’t know for sure.  I’m sitting back in my desk chair with the vibrate turned on the upper back selection and it does help some.  Sometimes I go sit in the shiatsu massage chair and that just hurts.  I have to sit funny for it to even get to my shoulders.

What happened is a few mornings ago I wasn’t wearing my bipap machine mask because sometimes I can’t breathe with it on so I have to go without for 1 night.  So when I sleep without it I sleep on my stomach and I sleep so weird that it puts a crick in my neck.  So I can’t put all the blame on this new seat but it doesn’t help my back either.

Yesterday I went on my morning bike ride despite the bad neck/shoulder pain but this morning I decided I was in too much pain to go out so I stayed home.

I’m really thinking about going to the chiropractor again because I get massages 3 days a week and they make me use their gym which helps with my weight loss lol.  The last time I went there I think I lost 10lbs in 1 month from using their gym doing the machine exercises as well as the ball exercises.  Maybe that will help me out some then I can learn what exercises I can do at home on my home gym so I will start using that again.

The only issue right now is that I’m broke.  I mean totally broke.  I have $1.75 available in the bank lol.  So I can’t take the bus there and they moved to across the street from the DMV which is a very long bus ride.  I wouldn’t want to take my bike because well, I’m going there because of my bike and I don’t have the proper locks for my bike yet until I get money.  So I’m kind of stuck until I get money.

I hope the pain will go away soon because I don’t have any pain pills or the money for them.  I do have a couple ibuprofens still for my carpel tunnel syndrome and I’m seeing that doctor on Friday so hopefully he will renew that for me.

Walnut Hollow Hot Tool Issues

On By Michel McDonaldIn craftsLeave a comment

July 15th 2009:

I just emailed Walnut Hollow with this query but I wanted to post it here as well.

I have a Creative Versa-Tool wood burning kit.  Sometimes the points get black from being used so much or maybe from being turned on for extended periods of time.  The points I can sand with a very fine metal sandpaper which I usually use when needed but the threads on the points also get black.  I can use a wire brush to get the black off the threads on the points but what about the inside of the tool?

I’m having issues getting the points on and even taking them off.  I have to use a pair of pliers to put the points on and take them off because it’s so tight from all the black on the threads.

So while I await their response I’m going to save this post as a draft so I don’t have to edit my post.

I am still waiting for their response but while I was waiting I decided to try my own little experiment.  I tried looking for a wire brush, it looks like a tooth brush but it’s wire instead of the normal plastic bristles your tooth brush has.  I wasn’t so lucky but I did find something that is a bit longer than the average tooth brush with longer bristles and is meant for use in the kitchen.  So I grabbed that and also a can of WD-40 meant to keep my bicycle lubed up at all times.

I sprayed some of that on 2 of my points and it soaked the In ‘N Out Burger napkins on my desk so the bottom of my desk is now an oily mess.  I proceeded to scrub the shit out of the points with the brush and even though I could see some blackness going onto the bristles, the threads didn’t change.

I then squirted some WD-40 into the chamber where you screw the points, not too much, I flipped it over and tapped it on the napkin so in case I put too much in there then it would drip out.  I then tried screwing a point on and unscrewing, you know, to grease the threads and it seems to have helped a little but not too much.  Maybe it just needs that to be done several times to get that shit out of the threads on the inside and on the points.

It’s too late now to get a response so back to the draft this post goes until I get a response hopefully tomorrow (Thursday).

July 20th 2009:
Dear Michel,

I believe that the ‘black’ on the Points and threads is due to a reaction when the metals get hot from the tool. To remove this, you can use fine grade sandpaper. As for any difficulty you have changing the Points using pliers, try using powdered graphite (found at most hardware stores) to help with changing Points on the tool. Powdered graphite is mostly used in locks to make keys slide in and out easier – works on our hot tool threads also.

Hope this helps,

Chris

Back and Knee Problems with New Bike Seat

On By Michel McDonaldIn HealthLeave a comment

As the title says I am having Back and Knee (not backne as in acne on my back) issues from this new seat.  I’ve adjusted it every way I can to get it comfortable.  No matter how I adjust it I am being pushed forward to the handlebars and it has been causing me issues with my shoulders and my upper back.

And my right knee has been giving me issues since I got this new seat.  Keep in mind this is only day 5 so maybe 10 more days (the guy said keep trying for 3 weeks, to me 5 days is 1 week since I only ride 5 days a week) and maybe, just maybe that will go away.

I’m going to keep trying though because I really don’t want to sit on anything that is going to cause numbness in my giggle area.

I removed the sheepskin during my ride today because I was thinking that maybe the sheepskin is giving me issues and it was.  That is what was making me slide forward all the time.  So just sitting on the seat without the sheepskin and the seat pretty much grabs onto my shorts like a cell phone on one of those rubber mats that you stick on your dashboard.  If that makes any sense.

I’m still going to buy another gel seat and cut the nose (or horn) off then sew it back together so it fits this new seat.  I think that will help not only raising me back up to where I was to give my knee some help but also my underwear seam won’t hurt my butt lol.  And I think it will feel better on my sit bones if I’m sitting on gel instead of the seat.  Actually the seat without any cover on it is pretty cushioned, it doesn’t really need any cushion so that’s good.

Bike Cam 2 Video

On By Michel McDonaldIn BikeLeave a comment

The video starts out on Manor St. and ends up at China Grade Loop. It takes me about 44 minutes to get to my final destination from the house then after I have rested for about 5 minutes I get back on the bike and head back home. My total round trip ride coming all the way out to here is 22 miles, it takes 2 hours but waiting for the stop lights/signs and my 5 minute break my total time is about 90-95 minutes and my average speed is 14.0-14.3 mph.

At the end it says To Be Continued… As soon as I get used to riding 22 miles per day and it’s not enough exercise then I will be adding more miles by continuing past China Grade Loop on the bicycle trail.

httpvh://www.youtube.com/watch?v=grd4VTPQtBs

Bike Cam Part 2 Troubles

On By Michel McDonaldIn BikeLeave a comment

I took the camera with me this morning and turned it on just before I got to the tunnel to go past Manor St.  I went through the tunnel, over the bridge and through the woods to grandmother’s house er um wait no that’s not right… ok, I went through the tunnel then over the bridge … then kept riding.

As I went over the 2nd bridge the bicycle went over the usual bumps before and after but the 2nd bridge screwed up the camcorders ability to auto focus lol.  I tried fixing it but it just would not fix so I stopped recording but I just could not fix it.  I turned it off hoping that would help and it did.  So I turned it back on and kept riding.  I went all the way to the end of that part of the bike trail and turned off the camera.

I get home and plug the camcorder into the computer and the program I use ImageMixer 3 gives me errors.  It cannot download from the camera at all.  I have a feeling it’s because of those darn bumps but then I go to watch it from the camcorder onto the computer with PowerDVD and it stops after only 20 seconds which was when I first started filming so I’m a bit stumped.

This morning at 8am they closed that part of the bike trail from the first tunnel to the 2nd tunnel until tomorrow afternoon at 2:30pm so tomorrow morning I won’t be doing my 22 mile trip, instead I’m going to have to settle for 16 miles so I won’t be able to do it over tomorrow.

The video plays just fine in the camera so I thought that maybe I could just plug it into the TV and record it with my DVD recorder.  Well, when I plug it into the TV it shrinks the video from 16:9 to 4:3 so that doesn’t do me any good.  I’ll need a widescreen TV to be able to do that.  So instead I just put the mini DVD into the DVD recorder and recorded it to a VHS then recorded it back to a regular DVD.

I tried putting the DVD into my computer but it won’t recognize dvd’s that I’ve recorded on the dvd recorder so I had to put it in my laptop.  It’s uploading now so as soon as it’s finished I will transfer it over to my computer and work on it.  I will try to get it on YouTube today and when I do I will post it here.  Well, as a new post.

Bike Cam Part 2

On By Michel McDonaldIn BikeLeave a comment

When I did the Bike Cam video the place where I stopped at was my half way point, the place where I would rest before I got back on and turned around to go back home.  That was 16 miles round trip.  Well, since then I’ve added to my bike ride.  I was going 19 miles then 20 miles then 21 miles and now I’m going all the way to China Grade so my bike ride is now 22 miles round trip.

So since I’m going to China Grade now, the next time I ride I will bring the camera with me and when I get to Manor St. instead of going through the tunnel I will set my camera up on the handlebars and then continue through the tunnel from there and go all the way to China Grade before stopping the camera.

This of course means that I will have to leave the house at 5am instead of the usual 4:30am because when I get to Manor St. the sun isn’t even up yet and I don’t think doing a video in the dark is very productive lol.  Especially since I don’t have a light for the camcorder.

Anyway, tomorrow is my day off from riding, I do 3 days on then 1 day off to give my body (and now especially because of the new seat) some time to heal.  So Thursday morning I will take the camera with me and video tape it and then by Thursday afternoon the video will be on YouTube.

If you want to help me before then, suggest a couple of songs for me to buy to put in the video via a comment.

Day 3 With My New Bike Seat

On By Michel McDonaldIn BikeLeave a comment

Today is the 3rd day and final blog post about my new Ergo bicycle seat.  I’m getting used to it more and now instead of just being strange it’s starting to feel normal.

It’s still too hard for my butt so I still plan on buying another gel seat cover and cutting off the nose (to spite its face? lol) then of course sewing it back up so I can just put that on top of the seat.  The sheepskin is nice but it’s a winter coat for a bike seat, not a summer coat heh.  Hopefully by winter I will be able to slip the sheepskin over the gel but I’m not quite sure how that’s going to work out so we’ll see.

I still highly recommend “the Bicycle Seat” but I would go with the gel seat if you have a fat ass like mine and you don’t like hard seats lol.

Jackson 3?

On By Michel McDonaldIn CelebritiesLeave a comment

Joe Jackson has said in an interview “who else is going to raise those kids?”.  Uh, anybody but YOU!  He was saying that he can see some talent in Paris and that Blanket can dance.  He already sees dollar $ign$ in his eyes.  Can you imagine if this fool gets his hands on those kids?  History will repeat if he gets his hands on these children and I just know that he will start beating them and he will take their childhood away from them.

Michael Jackson said that when he thinks about Joe Jackson he regurgitates and Joe said “yeah, regurgitates all the way to the bank”.  This man has ice in his veins not blood.  He can not get his hands on these kids.  I think that if they want to be performers that should be their decision and not forced on them.

As I said earlier, Joe Jackson said there is nobody else to take care of the kids.  And you think that YOU are the only one who is capable of taking care of kids?  What about Janet?  What about Germaine?  What about Diana Ross?  What about their birth mother?!?!  I think there are plenty of people who are more capable of raising a child let alone 3 children than you are Mr. Jackson.  You need to go away and get off camera please.